Home > Fluxbeam LED Conversion Kit > Troubleshooting > One Side Works Perfectly the Other Side is Experiencing an Issue of Any Kind

One Side Works Perfectly the Other Side is Experiencing an Issue of Any Kind

 


In cases where one side of the Fluxbeam LED Conversion Kit performs perfectly but the other side does not OPT7 can replace the component that is not working correctly with a brand new part under warranty. All we need to do is identify what part needs to be replaced using a simple test called the "SWAP TEST"
STEP 1-FLUXBEAM LED BULB SWAP
1. Start by disconnecting each Fluxbeam LED bulb from it's respective Redline LED driver and swap them
2. If the issue moves with the LED bulb then the LED BULB needs to be replaced
3. If the issue stays on the same side thje issue originally presented on then proceed to step 2
STEP 2-REDLINE LED DRIVER SWAP
1. Start by disconnecting each Redline LED driver from it's respective wire chain and swap them
2. If the issues moves/follows the Redline LED driver then the Redline LED driver needs to be replaced
3. If the issue stays on the same side proceed to swap the capacitor (If installed)
STEP 3-FLUXCAPACITOR SWAP (Optional)
1. If you do not have Fluxcapacitors installed (Only required if the Fluxbeam LED Conversion Kit 
flickers on both sides, skip to Step 4
2. Start by disconnecting each Fluxcapacitor from it's respective wire chain and swap them
3. If the issue moves with the Fluxcapacitor then the Fluxcapacitor needs to be replaced
4. If the issue stays on the same side proceed to swap the Polarity/Plug and Play wire (PP Wire)
STEP 4-POLARITY/PP WIRE SWAP
1. Since the standard connection off the Redline LED Driver is a 9006 connection, 9006 Fluxbeam LED 
Conversion Kit will not require the use of a Polarity/PP Wire
2. Start by disconnection the PP wire from it's respective wire chain and swap them
3. If the original issue moves with the PP wire; then the PP wire should be replaced
4. If the issue stays on the same side ensure the vehicle's power harness it tested for power or repeat 
the process

Upon discovering the part that should be replaced, please request this part using our handy part request form here: http://www.opt-7.com/clickbyclickguide/

font-size:x-small;">Powered by Formstack