Home > Aura Pro LED Kits > FAQ > Aura Pro Common Questions

Aura Pro Common Questions


 

Question: "First the lights will not work all the time with the music and does not let you pick the color of the lights when on the music sync."

Answer: Please ensure the control box is mounted on the vehicle body panels as it will need to pick up the frequencies/ bass of the music for the color of the lights to be changed. You can try installation it under the glove department or the side panels of the car doors. The music sync will only have the option of random color of cycle and not one color only. 


Question: "When I have the lights on blue and another solid color when the door opens the lights slowly flicker until they turn white and when the door is closed the lights will go back to blue but it is again a slow flicker until it changes. "

Answer: It sounds as though the mode selected is still on "sound sync" as it is picking up movements/ frequencies which will cause the lights to flicker. Please check the Mode it is in, the flickering should only happen when it is on Sound Sync, Pulse, and Cycle.


Question: "I had blue lights on and when I open the door it goes to white."

Answer: This may be explain as the last color option before existing/ turning off the engine. It will remember the last color choice of the last option it had. (See 2.01 Seconds on Bluetooth App to control Door Assist)


Aura Pro Color Options/ Modes:

- Random Color through cycles: Sound Sync and Cycle ONLY!

- Solid Color Options only 1 at a time:

  • Pulse
    • Speed selection of slow or face
    • Random Color button is selected as a 1 time color only rather than a random color cycle, each tap of the button gives you a different color each time
  • Strobe
    • Control brightness
    • Control Speed
    • White button means it is given for the one selection ready to touch. This is handy so that you do not need to scroll through the color for a white solid color. 
    • Random Color button is selected as a 1 time color only rather than a random color cycle, each tap of the button gives you a different color each time
  • Solid
    • Brightness control
    • White button means it is given for the one selection ready to touch. This is handy so that you do not need to scroll through the color for a white solid color. 
    • Random Color button is selected as a 1 time color only rather than a random color cycle, each tap of the button gives you a different color each time

Question: "Where should the door assist be connected to? 

Answer: You'll just need to find the power wire for something that turns on when your door opens and splice it into that. This could be a dome light, factory installed foot well lights, door chime or even be the wire that actually powers or signals the dash light for the open door, the idea is that when power is sent through that wire, it acts as a switch for the control unit that tells it to turn white, so you just split e into that wire and piggy back off it's power.


Question: "I have the Aura Pro and am trying to wire in the door assist, but the door assist only seems to be working when the app is already turned on (the lights will just change to the preset door assist color), but if the kit is switched off in the app, then the door assist will not come on when the door is opened. Is this the way it’s supposed to be or is there something wrong?"

Answer: In summary, the DOOR ASSIST function will only work when the vehicle is on and when the app is turned on. Therefore, should you turn on or off the Aura Pro app, the same action will as followed. If this is something you are not looking for - we recommend switching to a Aura V1 Control Box which will allow the door assist function to work with a control of the remote rather than an app control.

Depending on which Aura LED Kit you have, you will need a specific control box for a swap of the unit. You will also need to purchase the Aura V1 hand held remote for the Aura V1 Control Box to work. 

- Aura Underglow, Aura Running Board, Aura RV Underglow can be found here

- Aura Truck Bed, Aura Boat Interior & Deck, Aura Truck Bed can be found here

- Aura Wheel Well/ Double, Aura Grille, Aura Boat Interior LED Kit can be found here

- Aura Cruiser, Aura Interior, Aura Grille w/ 12'' Strips, Aura Interior & Double Row, Aura Sport Bike Strip w/ Soundsync can be found here.

If you need any support help on assistance or questions, reach out to us via Chat for Live Help  on Mon - Fri 9:30 am - 6:30 pm EST


Question: "How do I change sound sensitivity on the Bluetooth model?"

Answer: There is no sound sensitivity on the Bluetooth for the Sound Sync mode. However, you can select several brightness from the other modes on the App. 


Question: "I don't see the SoundSync Mode on my phone, what could be the problem?"

Answer: Please ensure the Aura Pro is connected to the Control Box. If you do not see the SoundSync Mode, it because your app was not connected with any devices or the app was connected with Aura Pro control box. Once your APP is connected with Aura Pro BT control box, sound sync mode will be showed on APP.

Steps on Connected - See here


Question: "The App ins't respond to the LED Kit, what could be the issue?"

Answer: Please ensure the Aura Pro app is download, you can check if you download the correct app here.


Question: "How many devices can I use to control the Aura LED Pro Kits?"

Answer: You can use one smart phone to control the Aura Kits at a time. If you wish to use a secondary smartphone device, you'll have to uninstall the original (1st smartphone) device and disconnect the control box from the main power source to reset the unit. Proceed to download the 2nd smartphone device to control the Aura Pro Kits. 
**Unfortunately, at this time the Aura Pro Kits cannot be controlled by two smartphones simultaneously. 


Question: "The App isn't responding to the LED's installed, could the control box be the issue?"

Answer: Let's asset if all connections are properly installed by testing the unit directly to the battery. Depending on the method that is used, testing directly with the battery will allow you to know if the LED's are faulty or not. If all LED's are powered, the issue is not with the control box, but rather than connectivity with the app. 


Have more questions we didn't list?

Contact our Amazing Customer Team by email at support@opt-7.com or chat with us Live at OPT-7.COM between Monday - Friday at 9:30 am to 6:30 EST